If you’ve never used a cone incense burner before, you may be wondering how to get started. Fortunately, the process is fairly straightforward.
The initial step is to place the cone onto your burner. Make sure its tip is pointing upwards.
Place the Cone
Cone incense burners are an easy and convenient way to add fragrance to your home or office. They come in various shapes and sizes so you can find one that meets your specific requirements.
According to their size and scent, incense cones should be burned for approximately 15-20 minutes. This will allow ample time for the fragrance to fill the room and spread throughout.
Place the cone on a heat-resistant surface and light it with either a lighter or matches. Please allow up to 15 seconds for the incense to fully ignite.
Once lit, gently blow out the flame to leave a smoldering ember behind. Once this has died down, you can extinguish the cone by placing it in a fire-safe holder.
Backflow incense cones create a smoke waterfall effect, making them popular for yoga and meditation practices. But be mindful of their dangers; follow certain safety precautions to avoid accidents.
Light the Cone
A cone incense burner is an ideal way to enjoy the soothing aromas of your favorite incense. They make for a wonderful focal point during meditation or yoga practices as well.
Cone incense burners can be lit using either a lighter or matches, just be sure not to let the flames remain on for too long. Leave the tip of the cone lighted for 5-10 seconds and then gently blow or fan it with paper in order to extinguish it.
Once the flame has been extinguished, look for a faint orange glow coming out of the tip of the cone. That’s an indication that everything is working properly.
Incense smoke cascades down a backflow incense burner to create the beautiful waterfall-like effect, making this type of burner so special. While this can be very relaxing and calming, make sure the room air is free from any in-take air before using your backflow incense burner.
Extinguish the Cone
Once your cone incense burner has burned down to its base, it is time for you to extinguish it. Be sure to place it on a heat-resistant surface and do not store in any flammable holders.
Extinguishing a cone incense burner is similar to blowing out an incense stick. Simply blow or fan away the flame until only a glowing red ember remains and no more smoke produces its characteristic smoldering aroma.
Cone incense burners require oxygen to maintain their flame, so they should be placed away from strong air currents and drafts. If this is not feasible, backflow cones can be left to burn out on their own and any ashes falling onto a heat-resistant surface can be scooped up and disposed of safely.
One of the most stunning aspects of a cone incense burner is its cascading waterfall effect of smoke that cascades downward from its top. This makes them perfect meditation spots, as the sound creates an ambiance of serenity.
Put Out the Cone
Once your cone incense burner has been used up, it is essential to properly extinguish any ash left behind. Doing this helps reduce the potential risk of accidents.
If you’re uncertain how to do this, look at the back of the cone. You should see a red tip that glows and releases an inviting puff of smoke.
Incense should burn for about five to ten seconds before being extinguished. Additionally, you should notice a small amount of embers and smoke emerging from the bottom hole in the cone.
Once all incense is gone, discard it safely and place an ashtray near the burner to collect any ashes. Doing this reduces the chance of burning yourself or spilling ash on the floor.
You might also like to read:
Incense Burners
how to use incense oil burner pipe
what is the incense burner in the catholic church called
